Hot Tub Filter Cleaning

Most hot tub owners should already know the importance of cleaning their spa filters regularly and thoroughly, however we feel this point needs reinforcing to spa owners across the country. We regularly get calls from new and experienced hot tub owners who are experiencing such messages as "LF", "FLO" and "SNS". These problems are all related to flow issues that are 95% of the time caused by dirty filters.

Some companies are poor at after-sales service, with some even sub-contracting their own servicing and repairs to other companies. This results in customers being misinformed of the key processes involved in owning a hot tub, one of which is the cleaning of cartridge filters. The "grab and run" sales technique is damaging to the lifespan of many hot tubs, as proper maintenance techniques are not suggested. Although filter cleaning may be as simple as soaking the filters once every two weeks, we feel better routines are needed to ensure your hot tub stays in good condition for years to come. Below we have outlined a few cleaning routines/techniques for differing lifestyles.


Routine 1 - The Very Busy Person - Little Time - Low to Medium Hot Tub Usage.

• This routine is simple, quick and effective but suits those who have a busy life schedule. 
• 1 DAY AFTER FILLING THE HOT TUB - Rinse Filters with hose.
• EVERY MONTH (DURING WATER CHANGE) - Soak Filters in filter cleaner.

Routine 2 - The Busy Person - Average Spare Time - Medium Hot Tub Usage.

• This routine is more thorough than the routine suggested above, but less so than the ideal routine below.
• 1 DAY AFTER FILLING THE HOT TUB - Rinse Filters with hose.
• FORTNIGHTLY - Rinse Filters with hose.
• EVERY MONTH - Soak Filters in filter cleaner.

Routine 3 - The Less-Busy Person - Lots of Spare Time - High Hot Tub Usage.

• This routine is the recommended routine for those that have time to clean their filters more thoroughly.
• 1 DAY AFTER FILLING THE HOT TUB - Rinse Filters with hose.
• WEEKLY - Rinse Filters with hose.
• FORTNIGHTLY - Swap Filters with clean ones, then soak the dirty filters, allow to dry and place back in within a fortnight.

These routines are not strictly realistic but they give you an idea of how to organise the maintenance of your hot tub around your lifestyle. You may be wondering why we recommend that your filters are rinsed within one day of filling up your spa? Well this is because tap water is dirty, so by rinsing one day after filling up you can remove any debris or impurities that were in the tap water. The best technique is that suggested in Routine 3. This involves having two or more sets of filters, constantly swapping them and ensuring that they are dry when placing back into the hot tub to add to filtering efficiency.Obviously those of you who love a hot tub party will need to clean them thoroughly after such an event and these routines do not consider such high usage events.

If you have any questions in regards to filter cleaning, e-mail me on eddie@happyhottubs.co.uk.

Eddie, HHT.

Sponsorship 2011/2012 - Billy Sharp (Southampton FC)

Another successful year for Southampton Football Club saw them promoted to the premier league with a second consecutive promotion. 


As a Saints supporting company, we were delighted to be the official player sponsor of Billy Sharp for the 2011/2012 season. Having joined from Doncaster in the January transfer window, Billy scored an extremely helpful 9 goals in 11 league appearances. With two vital goals against 'that lot down the road' being key in ensuring bragging rights were temporarily shared until they were relegated and the saints were promoted to the premier league!


On the evening of Friday 4th May 2012, we attended the Player Awards Dinner at St. Mary's, sitting with Billy for the event and meeting the rest of the squad. This was an excellent occasion and we would like to wish Billy and Southampton Football Club all the best in the top flight. Come on you reds!

Hot Tub Energy Saving Tips

Hot tubs have a key thing in common, the heating of water up to a set temperature and maintaining this temperature with a flow-through heater. A spa heater consumes the most electricity of all the items on a hot tub, and is comparable to a kettle in electricity consumption. Therefore, in order to keep costs down, we must focus on conserving as much heat as possible.

Hot Tub Covers

We repeat this time and time again, a good condition hot tub cover is vital to conserve maximum heat and any slight damage can reduce energy conservation massively. Insulation foam that has snapped can cause a huge loss of heat as the sealed unit of insulation has been broken, to prevent this it is recommended that a hot tub cover lifter is used and it is important to ensure no individuals (specifically children) treat the hot tub cover as a bed! Torn vinyl can also lead to a loss of vital heat, as once again, the sealed unit of the hot tub cover has been perforated. The two above problems cause the biggest issue with hot tub covers, water-logging, see our previous post on this problem (Click Here). A damaged/waterlogged hot tub cover results in no R-value of the hot tub cover, so to conserve pounds, a new hot tub cover is recommended, See the cover section of our website to order a a high quality replacement (Click Here).

Windbreaks

Simple, yet very effective. The panels of a hot tub do not lose as much heat as a damaged hot tub cover however, if the hot tub is in an open area and at constant battle with the elements, windbreaks can help conserve some heat and energy. Specific hot tub gazebos help conserve heat effectively but a simple fence can also do this just as effectively without the high cost.

Hot Tub Control Settings

We get regular calls from customers asking why their hot tub hasn't heater, when we find out that is has simple been put onto an Economy mode without intention. Although this is a regular mistake, users are finding that this can actually become helpful in conserving energy and saving money. In economy mode you can program the hot tub to heat for a certain time, and when the hot tub is not heating for a specific time, it is held at a lower temperature like 21 degree Celsius. Instead of holding the temperature at between 38deg-40deg in standard mode, the lower temperature will help conserve energy.

Air Jets, LED Lights & Air Blowers

All those listed above are great accessories for your hot tub are spa, whether its wowing friends with your LED lights, adding power to jets with air or cooling off with the air blower, these features make your hot tub special. The problem comes when features are left on whilst the hot tub is not in use. LED lights consume unnecessary electricity when left on and by simply turning them off you can save £'s! Air jets allow a slight air intake into the water system, this obviously cools the water, lowering the water temperature over time, all you need to do is ensure that you turn the air jet controllers off when the hot tub is not in use to prevent this cooling from happening. This is the same with air blowers, they cool the water quite rapidly if on unnecessarily, so ensuring the blower is off and not used unnecessarily can also help save energy.

Cartridge Filters

Clogged or worn out filters can reduce circulation to such an extent that pumps can be damaged by dry running. Heater element efficiency is also reduced as water flow is affected on such a scale. Luckily most systems, such as Balboa control systems have "DR" and "LF" warnings to prevent heaters from burning out if water is reduced to such an extent. However the fact is you must ensure that filters are regularly checked, cleaned and if necessary, replaced, and by doing this strain on the pumps and heater will be reduced, making your hot tub much more efficient. For information on our high quality Pleatco filters......Click Here. To see our full range of stocked filters....Click Here.

Floating Thermal Blankets

When these products were simply transferred from the pool cover market into the hot tub industry, people asked...Why did we not sell these before? And rightly so, by placing a thermal blanket on the surface of your hot tub water, you can make a high return for such little investment. Not only does the cover prevent steam from leaving the hot tub surface, saving you money, it also increases your spa cover life by preventing chlorinated moisture from attacking your hot tub cover underside. A highly recommended investment. To see the thermal blankets we offer..Click Here

I hope this post will help save you money whilst being able to fully enjoy your hot tub!

For any questions or information e-mail (eddie@happyhottubs.co.uk)

Follow us on Twitter @HappyHotTubs (Here)

Like us on Facebook (Here).

Some of this content was based on ideas from SpaDepot.com (link - http://www.spadepot.com/spacyclopedia/energy-conservation.htm)

The Costs of Running a Hot Tub

It's a key influence in the decision to purchase a hot tub, this influence is the cost of running a hot tub.

Firstly, we need to look at the specific costs of running a spa.....

Water -

A good place to start considering hot tubs wouldn't exist without its presence. With most houses in the UK expected to have water meters fitted within the near future, the days of relaxed water usage are over. With hot tubs averaging a water capacity of 1000 litres, the filling and re-filling of spas can be expensive, especially as draining is recommended every 3 months. However, water costs, in comparison to chemical and electricity costs are relatively low.

Electricity -

With an average hot tub running two pumps and a 3kw heater, clearly electricity is the main cost in the running of a spa. Most hot tubs have two, two hour filter cycles every day and this is separate to the running of the pump when the spa is heating. The main electrical requirement is the 3kw heater, however once the hot tub has reached temperature, this cuts out, therefore, the most expensive time on a hot tub, is the re-fill period, where the temperature rises for a period between 15 & 20 hours. The most effective way to save on this cost is to ensure your spa cover is in top condition and not waterlogged, as this can lead to heat loss, which requires the heater to kick in.

Chemicals -

This cost has significantly decreased in the last 10 years, as chemical prices have dipped. However, it is still key to consider the costs of maintenance products. This cost really depends on what the hot tub is maintained with, is it chlorine, bromine or a chemical-free system such as Aquagarde. Chlorine is the cheapest sanitiser to run your spa on, and a 5kg tub of granules can last 2 years if used correctly, this is the main chemical needed to ensure water safety. Bromine is the second cheapest, but significantly more than chlorine due to less popularity and its softer touch on the skin. Chlorine-free systems such as Aquagarde & Aquafinesse are significantly more expensive compared to the standard sanitisers of bromine and chlorine, simply because the technology contained in them is unique. Other water chemicals, which assist the standard sanitisers are not strictly required but products such as No Foam can make maintenance easier. Generally, chemical costs are less when you shop around and do not get fooled into the "unofficial chemicals will invalidate warranty" scam. This scam is so easy to be fooled into as a new hot tub owner, but it has no ground to be based on, most chemicals come from the same factory in South Africa, this factory simply re-labels the products to the appropriate brand.

Go HotSpring Spas, Go Highlife!..

The HotSpring Highlife collection contains the SilentFlo circulation pump that draws the same as a 40 watt  lightbulb! With full FiberCor insulation and a top quality spa cover, Hot Spring Spas are the most efficient hot tub on the market.!

Happy Hot Tubbing !

Eddie.

eddie@happyhottubs.co.uk

Hot Tub Myths...

Chlorine causes my eyes to sting in the hot tub...

MYTH - Chlorine does not cause your eyes to sting in a hot tub or swimming pool. An incorrect PH level can contribute towards over-acidic or alkali water stinging your eyes. Another contributor towards eye sting is bacteria from other people, which is not being killed by chlorine, this suggests a low chlorine level and poor sanitisation rather than chlorine itself causing eyes to sting. Evidence of this is at public swimming pools, where eye sting is usually most severe due to the number of bathers using the pool compared and an inability to chlorinate sufficiently with so many users.

Hot Tubs are best in summer...

MYTH - Whilst it is a matter of opinion whether hot tubs are best in summer or winter, a general consensus within the hot tub industry suggests you cannot beat hot tubbing in the snow, wind or rain. The popularity of hot tubs in Northern Europe & Scandinavia reinforces the popularity of bathing in arctic conditions, whats better than relaxing in a hot tub at 40 degrees, whilst the snow falls around you. The winter/summer debate lives on!

The More Jets, the Better...

MYTH - Its the top sales feature of most hot tubs, the amount of jets, yet usually this does not affect the quality of massage. When a salesmen hits you with jet figures of 100-150, your initial reaction is "wow", but when you realise that the same amount of pumps power an 100 jet hot tub as a 40 jet spa, you should realise that power in a spa with a large amount of jets is simply spread more and power is less in each jet. Also, remember the saying..."Quality, not Quantity", well this is key, our Astro Spas are produced to give your muscles a precision massage rather than a weaker, less directed massage, which simply wastes pump power.

I need to run plumbing lines to my backyard hot tub...

MYTH - In all portable spas, the equipment & plumbing is built into the cabinet and shell, meaning you simply have to fill the hot tub using your hose pipe and no external plumbing is required. For draining, you can simply use a built in gravity drain (if your spa has one) or use a submersible pump to drain the water.

I need to empty my hot tub after each use...

MYTH - All portable hot tubs have built in flow-thru filtration systems to ensure the water is constantly filtered and by adding chemicals, you will not need to empty your hot tub regularly, just like a swimming pool. However, we do recommend emptying your hot tub about once every three months, as the water becomes over-saturdated with chemicals.

I need to turn my hot tub off after use...

MYTH - Although this is possible, it is a common myth that hot tubs should be turned off every time after use, as the filtration cycles keep the water fresh and in order to maintain temperature to save costs, the flow-thru heater must be on. Most hot tubs have various modes, such as Economy, to save energy.

Myths....Busted !

Eddie.

HHT.

eddie@happyhottubs.co.uk

How to Drain a Hot Tub ?

It is recommended that you empty your hot tub roughly every 3 months, as the sanitisation of water can only go so far before chemicals do not affect the quality of water. So, this leads onto the question of, how do i drain my hot tub ?

Well, the first and most simple way would be using a built-in gravity drain, usually situated on the outside of the hot tub, either coming out of the base or panel. These are available on certain models, but not others, so ensure you check with your retailer to see if you have one built in. These drains usually work very simply, by either pulling out the drain to activate it, pressing the centre of the external adapter or simply turning a handle to allow water flow. The hot tub will then drain using gravity, this can be slow in some models, yet is increasingly efficient with newer models, draining hot tubs in less than 10 minutes. The main issue with these drains is their vulnerability to breakage and leaking, simply due to them being external and under high pressure from water. Once the hot tub is fully drained, ensure your drain is left open to prevent the pipes cracking due to freezing in winter.

If your hot tub does not contain a drain, don't worry, some hot tubs do not have drains due to the issues mentioned above, but there are still two simple ways to empty your hot tub.

Firstly, you can empty your hot tub using the traditional method of siphoning, using an existing hose pipe to slowly drain the hot tub. This is the more cost effective way, by using a hose pipe, one end in the hot tub, the other in the area you want to drain the water to, you then must get a flow of water going, by either sucking on the hose pipe or lifting up the hot tub end of the hose pipe and quickly placing back into the spa. Once the flow is going, you can leave the hose to drain the hot tub in its own time.

If you need the hot tub emptied faster than it would by siphoning, you will need to invest in a submersible pump (Image-Top Right). This is a water pump, with a floating cut-off switch, used to drain hot tubs in minutes. Simply plug in, place in the hot tub and wait for it to finish. The pump uses a lay flat hose to drain the water out, so you can customise the hose length to your requirements. To see the submersible pumps available from us see our website- (http://bit.ly/16rB18I) or call us on (UK-0845 366 1122).

Happy Hot Tubbing.

Eddie. HHT.

eddie@happyhottubs.co.uk

Hot Tub Headrest Problems

Damaged hot tub pillows, Its probably the biggest warranty issue for

hot tub manufacturers and the most bugging thing for hot tub owners.

The truth is, its inevitable that a soft, rubber/vinyl item, in a warm, damp & chlorinated environment will eventually deplete. The main problem being the chlorination of hot tub water in affecting the condition of the spa pillows. As you may know, Chlorine attacks everything, whether its skin, lungs, eyes or even rusting metals. So, when a soft vinyl spa headrest is enclosed in a chlorinated environment, the laminate on the pillows breaks up and eventually the internal rubber will start to flake off. So what can you do ?

Well, we sometimes recommend removing headrests from the hot tub when it is not in use, this obviously removes them from the damp, chlorinated environment, prolonging their life. The one issue that arises from constantly removing headrests is the lugs on the back ripping off upon removal, this means the pillow cannot be secured properly, so if removing headrests, you must be careful and ensure the lugs do not rip. If this is too much of a hassle then we try to reinforce the idea of leaving the spa cover off for 10-15 minutes after chlorination, this gives time for the nasty chlorine gases to disperse in the air, not directly onto the hot tub cover or headrests.

So, your hot tub pillows are totally unusable and are flaking into the water, what now ? Well, you really need to remove them totally, or purchase new ones. Headrests have always been a high-cost spare on hot tubs, due to their specialist moulds and variation, meaning manufacturers can charge astronomical prices. So, it would be sensible to look after the pillows whilst they are still usable, saving money in the long-term.

We are happy to help over the phone (Tel:0845 366 1122) or e-mail us with any questions about headrest care (admin@happyhottubs.co.uk). We stock a variety of headrests, from Master Spa to Spaform, so if you require a quote, e-mail us a picture and we will get back to you with a price.

Happy Hot Tubbing !